无翼少全彩日本漫画

Standard Machine Specifications

Download Specifications Sheet

  VERTICAL PRESSES HORIZONTAL
Machine Series 5 Ton1 10 Ton1 15 Ton1 20 Ton2 100 Ton 200 Ton 300 Ton 500 Ton 600 Ton 800 Ton 1400 Ton 1800 Ton 100 Ton 200 Ton
Inj: a,b Inj: a,b Inj: c Inj: a,b Inj: d,e Inj: e,f Inj: e,f,g Inj: f,g,h,i Inj: g,h,I,j Inj: i,j,k Inj: k,l Inj: k,l Inj: d,e Inj: e,f

CLAMP

Clamp Force (U.S. Tons) 5 10 15 20 100 200 300 500 600 800 1400 1800 100 200
Pressure @ Rated Tonnage (PSI) 1,200 1,600 2,400 2,400 2,310 2,600 2,500 2,765 2,600 2,600 2,600 2,600 2,310 2,600
Mold Height (Inches) Minimum 2.75 2.75 5 4 3 3 4 5 5 7 11 11 6 6
Mold Height (Inches) Maximum 8 8 13 11 15 16 14 16 16 20 20 20 10 14
Platen Size (Inches) Width 8 13.5 17 12 14 or 16 18 22 30 30 32 42 42 >14 18
Platen Size (Inches) Depth 8 8.5 10 12 16 22 25 30 36 40 44 44 14 22
Distance Between Strain Rods (Inches) Left to Right (n/a) (n/a) (n/a) (n/a) 19 22 26 36 36 37 46 46 16 20.5
Distance Between Strain Rods (Inches) Front to Back (n/a) (n/a) (n/a) (n/a) 10 13 17 17 22 26 24 24 15.5 24
Daylight - Maximum (Inches) 14 14 19 17 21 22 27 40 40 42 44 44 33 33

GENERAL

Heating Platen (kW / Platen) 1.5 1.5 4.5 4.5 6 8 12 15 15 15 24 24 6 8
Inject Temperature Controls (kW / Zone)3 2 2 2 2 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
Hydraulic Pump Motor (HP) 10 10 10 15 30 40 50 50 / 100 50 / 100 100 100 100 30 50
Hydraulic Pump Motor Speed (RPM) 1,200 1,200 1,200 1,800 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200
Hydraulic Pump Volume (GPM) 7 7 9 15 17 30 38 38 / 62 38 / 62 62 62 62 15 35 / 21 / 7
System Pressure - Maximum (PSI) 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800
Power Required Maximum (Amps)4 25 25 45 50 70 81 116 122 / 181 122 / 181 181 201 201 70 81
Reservoir Capacity (Gallons) 30 30 30 30 65 100 125 125 / 180 125 / 180 180 180 180 100 200

SIZE

Overall Width (Inches) 72 72 88 42 108 104 125 137 165 163 186 186 158 221
Overall Depth (Inches) 40 40 48 49 84 104 113 111 122 126 123 123 58 65
Clamp Unit Height (Inches) 96 96 88 105 75 78 77 92 96 107 137 137 65 72
Clamp Unit Weight (Lbs) 3,500 3,800 4,000 4,200 6,000 8,000 14,000 20,000 30,000 38,000 86,000 105,000 12,000 20,000

1 = 'C' Frame Style Vetical Press - "Up" Acting

2 = 'C' Frame Style Vertical Press - "Down" Acting

3 = Water or Oil 3 or 4 Zones

4 = Standard 460 VAC, 3Phase, 60Hz

INJECTION UNITS a b c d e f g h i j k l
Inject Sizes 3-oz. 5-oz. 14-oz. 17-oz. 2.7# 5.5# 10# 15# 20# 30# 40# 55#

INJECT

Shot Capacity @ 1.25 Specific Gravity (Lbs) 3 oz. 5 oz 14 oz 17 oz. 2.7 5.5 10 15 20 30 40 55
Maximum Displacement (Cubic Inches) 4.2 7 19 24 60 122 225 335 450 675 900 1325
Inject Pressure (PSI) 11,000 11,000 16,700 27,700 22,000 22,000 25,000 21,300 21,300 24,400 24,400 22,500
Inject Rate - Max (Cubic Inches / Sec) 5.2 5.2 5.8 5.9 10 17.3 14.8 17.8 29 25.4 25.4 27.1
Inject Time - Minimum (Sec) 0.8 0.8 4.0 4.1 6.0 7.1 15.2 18.8 15.5 26.5 35.4 41.5

SCREW

Screw Diameter (Inches) 1.19 1.19 1.50 1.50 1.50 2.50 2.50 2.50 3.50 3.50 3.50 3.50
L / D Ratio 12 : 1 12 : 1 15 : 1 >11 : 1 11 : 1 11 : 1 11 : 1 11 : 1 11 : 1 11 : 1 11 : 1 11 : 1
Screw Speed (RPM) 0 - 150 0 - 150 0 - 150 0 - 160 0 - 210 0 - 160 0 - 125 0 - 85 0 - 85 0 - 85 0 - 85 0 - 85
Back Pressure (PSI) Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable

WT

Inject Unit Height (Inches) (n/a) (n/a) (n/a) 74 74 100 114 125 148 130 153 187
Inject Unit Weight (Lbs) (n/a) (n/a) (n/a) 1,100 2,000 3,000 6,000 7,000 7,500 11,250 15,000 22,000

Rubber Weight: 1Lb. (@ 1.25 Specific Gravity) = 22.2 Cubic Inches : 1ln3 = 16.39 c.c.

Note: Add [Clamp Unit Height] and [Imject Unit Height] for Overall Unit Height

Add [Clamp Unit Weight] and [Imject Unit Weight] for Total Weight

Available Options:

  • Larger Platens
  • FIFO Injection Units
  • Larger Injection Units
  • Shuttle Systems
  • Core Bar Systems
  • Top Hydraulic Ejectors
  • Bottom Hydraulic Ejectors
  • Multiple Zone Heating Platens
  • Cold Runner System
  • Oil or Water Temperature
  • Control Units

无翼少全彩日本漫画Plus any other modifications you may require.